Swansea copperworks: Big hopes for Musgrave engine

It is hoped the Musgrave engine can eventually form part of a larger visitor attraction

A team of volunteers are going full steam ahead at restoring a 100-year-old steam engine to its former glory.

Swansea University are co-ordinating the project to restore the Musgrave engine which once powered the mills at the Hafod-Morfa Copperworks.

The engine has decayed since the works were abandoned in the 1980s, and the team of 25 volunteers hope it will become a visitor attraction.

Swansea has a long history producing copper and was known as 'copperopolis'.

The works were abandoned in the 1980s

A group of 25 volunteers are currently working to restore the original gantry crane, which was used to support the engine.

It is then hoped the site will be deemed safe enough to begin work on the engine, one of Swansea's only scheduled ancient monuments.

Former foreman Ivor Williams said the engine was well maintained and showed very little signs of wear

Project co-ordinator Stuart Griffin said he expected the entire project to take three or four years.

"It's such an important engine and building, so to be left in the state it was had been a real concern," he added.

It was installed in 1910 and has been credited with keeping the Hafod-Morfa site open 20 years longer than most copperworks in the area.

The group of volunteers are removing the engine crane first before starting work on the engine

"This is the last mechanical remains of Swansea's several-hundred-year copper history," said Tom Llewelyn-Henderson, the project's lead engineer.

Former Hafod-Morfa foreman Ivor Williams started working with the engine back in 1960 when it was already 50 years old.

• Recreated Talisman steam engine preparing for 300-mile tour

• Steam trains to return to the West Midlands mainline

• Steam locomotive breaks down on excursion

He added: "Every year we used to strip down the Musgrave engine and check it.

"We'd check the bow, check the piston, and year after year there was very little wear in the engine."

The first phase of work, aimed at restoring the engine's supporting crane, is set to finish in December, with funding from the Heritage Lottery Fund and Swansea Council going into a wider restoration at the site.